Browse all 5G NR bands

FR2-NTN · FDD · Release 19 reference

5G NR n511 frequencies and NR-ARFCN ranges

5G NR n511 is FDD (FR2-NTN): downlink 17300–20200 MHz, uplink 28350–30000 MHz. View exact NR-ARFCN ranges, rasters and specification notes.

downlink
17300–20200 MHz
uplink
28350–30000 MHz

Band-specific conditions

  • Satellite access (NTN); requires a satellite-capable configuration and the applicable regional conditions.

Channel reference ranges

Inclusive channel reference ranges for 5G NR n511
DirectionRaster / conditionFirst channelStepLast channel
downlink60 kHz155333641746664
downlink120 kHz155333681746664
uplink60 kHz208499912112499
uplink120 kHz208499922112499

Inclusive endpoints describe the reference grid. A usable carrier must also satisfy bandwidth, edge clearance, subcarrier spacing, synchronization raster, equipment and band-specific requirements. Enhanced rasters require corresponding support. Allocation edges are not automatically usable centre frequencies.

Worked downlink conversion

NR-ARFCN 1650000 maps to 18750 MHz.

F_REF = F_offset + ΔF_global × (N_REF − N_offset). Below 3000 MHz use (0 MHz, 5 kHz, 0); from 3000 MHz use (3000 MHz, 15 kHz, 600000); from 24250.08 MHz use (24250.08 MHz, 60 kHz, 2016667). The band raster is an additional constraint on that global grid.

Open 5G NR n511 in the NR-ARFCN calculator

Electrical length and propagation example

At 18750 MHz, the free-space wavelength is 1.599 cm, the half-wave length is 0.799 cm and the quarter-wave length is 0.400 cm. Free-space path loss over 1 km is 117.908 dB.

These are reference calculations, not an antenna cut length or coverage prediction. Add feeder losses, antenna gains and propagation effects in the full link budget. A band match does not identify an operator or grant permission to transmit.

Sources and version

3GPP TS 38.101-5 V19.5.0 (Release 19, August 2026), tables 5.2.2-1, 5.2.3-1 and 5.4.2.3-1 through 5.4.2.3-3. Dataset 3gpp-rel19-2026-10-01; checked 2026-10-01. This page records that specification version rather than implying support in every device or country.

Bands with overlapping allocations

At least one corresponding uplink or downlink range overlaps; this does not imply equipment compatibility.

Optional analytics are off.